Consolidated H-4 Aerosol Overcapper
SOLD
This is a rotary 4 head chuck-type overcapper capable of running at speeds of up to 90 cans per minute. The machine was last running 211/66mm cans and 211-66mm doubleshell and tamper-resistant caps.
This machine has been out of service for approximately four years, and is in good condition. We are conducting an inspect and repair as necessary program , and will offer the machine in good running condition.
 |
 |
 |
| The Consolidated Capper as it arrived at our shop. Front view | This is the rear view showing the sorter in blue, on the lower right side. The sorter mounts on the post seen on the upper right portion of the turret shroud. | This is a detailed view of the can handling, drive section, and cap chucks of the turret. |
 |
 |
 |
| We assembled the capper and ran the motors. | The control cabinet has contactors inside. These could be re-used, but we did not rewire them. | The cams and spindle assembly are in good condition, no excessive wear seen. |
Please keep in mind that we have spare parts for this machine, including cap chucks for the H series cappers.
Back to "Tippers, Cappers, Marble droppers"
