Consolidated Rising Pin Capper for 35mm Caps
This is a Consolidated CaPeM Model F1-30-RP set up for 35mm caps. This piece is in good working order. The serial # is 3547
 |
 |
 |
 |
 |
| This is a front view of the capper showing the pin raising Cam | This is a rear view | This view is the cap exit shute and extension mount . | This is the Chute extension and escapement. | This view shows a close up of the pins and a view of the drive components. |
 |
 |
 |
||
| Shute in place | View of escapement | Caps in escapement |
This capper is in well kept condition, still sporting the origional paint. This sorter will sort the caps used frequently on extruded aluminum cans as shown in picture.The caps are plucked out of the escapement by a passing can that is fed through and to a seating device.
Back to " Tipper, Cappers, Marble Droppers, Tube Tapers"