Thomas Industries Vacuum Pump
This is a 5 HP vacuum pump with a 78.6 gal. tank. The motor is 5 HP, 208-230 / 460 V 3 Phase NON-XP unit with a vacuum control switch and on/off switch mounted on the assembly. The oil recovery/ holding tank is mounted vertically next to the motor. This is a rotary vane style pump, model 100/NRV55.
 |
 |
 |
 |
| This is a front view showing the rotary vane pump/ motor/ oil reservoir and controls | This rear view shows the oil cooler and belt drive components | Side view showing Vacuum outlet | This is a close-up of the motor/pump/ and controls |
This pump will need some new hoses and some basic maintenance, but it has been run in our shop and pull good vacuum. It has been wired for 230 3PH.
Back to " Crimpers and Vacuum Pumps